Flashing new firmware on the Samsung D500
I. Introduction
First of all, I’ll start with a warning:
FLASHING THE D500 WILL VOID YOUR WARRANTY AND IS COMPLETELY AT OWN RISK!
Beneath are the things you need to flash the Samsung D500:
#A Samsung D500 Flash cable (not the Data cable!We can look for it here.)
![]()
# 9 Volt Battery for the Flash cable
II. Backup Guide
First thing you need to do is make a backup of your own firmware, so that in case the flashing of the new firmware fails, you can still flash your old firmware back. Now let’s get started.
- Connect the flash cable at a COM-Port on the back of your computer.
(Check your settings of the COM-Port at the Hardware Settings, the Baud-setting must be at 115200) - Conect a 9 Volt Battery on the Flash Cable.
- Remove your Sim-Card from the phone and put the battery back.
Please note: The battery must be completely loaded before the flashing process!

Posted May 17, 2006
Comments(15)
