– you cannot install skins via BT or WAP, so do not use WAP ID

**WARNING** this process will void your warranty, and may break your phone. perform mods at your own risk!

first, check if your phone is compatible with skins. to check go to “settings”–>”personalise”–>”skin”
tools you will need:
-PST 6.7 or higher (googlesearch)
-P2k tools
-P2k Commander
-datacable

there are three methods for installing skins: Read more »

#*0000#
#*0400#
#*1200# – AFC DAC Val
#*1300# – IMEI
#*1400# – IMSI
#*1700# – ( ) Command #*1700 Executed
#*1800# – ( ) Command #*1800 Executed
#*1900# – ( ) Command #*1900 Executed
#*2000# – ( ) Command #*2000 Executed
#*2100# – ( ) Command #*2100 Executed
#*2200# – ( ) Command #*2200 Executed
#*2252# – Current CAL
#*2255# -
#*2256# – Calibr.-Info
#*2282#
#*2285#
#*2286# – Databattery
#*2337# – ( ) Permanent Registration – Not Yet Implemented
#*2355#
#*2400# – ( ) Command #*2400 Executed
#*2474# – For CMD Set – DEBUGBATTERY in cihard.opt
#*2527# – GPRS Switching Set to class {4/8/9/10}
#*2558# – Time ON
#*2562#
#*2565#
#*2677# – AMR State: {None / Full Rate}
#*2679# – Copycat Feature: {ACTIVATED/DEACTIVATED}
#*2787# – CRTP {ON/OFF}
#*2834# – Audio path Mobile Normal
#*2836# – AVDDSS Management: {DEACTIVATED/ACTIVATED}
#*3230# – Trace Enable DCD disable
#*3231# – Trace disable DCD Enable
#*3232# – Current Mode {Trace enabled/DCD enabled}
#*3270# – DCS Support: {DEACTIVATED/ACTIVATED}
#*3282# – Data: {DEACTIVATED/ACTIVATED}
#*3333#
#*3353# – General Defence Code Erased
#*3370#
#*3377#
#*3476# – EGSM: {DEACTIVATED/ACTIVATED}
#*3676# – Flash Volume Formated
#*3683#
#*3737# – Some Codes
#*3777#
#*3779#
#*3825# – ( ) Command #*3825 Executed
#*3837#
#*3849#
#*3851#
#*3876#
#*3877# – Dump of SPY Trace

Read more »

The universal unlock code is *2767*637# do this without your sim in
By default, the firmware (software) for x600 only receives java apps and other applications like stuff by serial port.
but even for it, you have to enable the serial port, which also causes the closing of all other ports, even the IrDA too ..
well, guess what, i have very good news for you,
do you know, you can increase the sound level, the sound level for tones, speaker fone, etc, can be increase even then if it is at max (level 4) you still can do it,
just follows the instructions!

**************** HERE WE GO **************
Enter the following code:
*#8999*8378#
(You’ll be shown menu, then …)

Read more »